Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Kempsville Homeowners
A broken garage door spring turns your main entrance into a wall. The door won’t lift, the car stays parked, and the house is suddenly entered through the front door with an armload of groceries. Garage door spring repair in Kempsville typically costs $180 – $340 for one spring, and we can often handle it the same day you call. Springs are the most dangerous component in the whole door system, which is why we treat them as their own service rather than a side job. Our technicians have up to 8 years of experience and arrive ready to diagnose torsion and extension systems on the door you already own. One call covers the whole door, from the spring to the opener, without handing you between an installer and a repair tech. Reach us at (844) 697-8393.

What Our Garage Door Spring Repair Service Includes
Every spring job starts with a diagnosis of the whole lifting system, not just the part that snapped. The spring is one piece of a balanced assembly, and how it’s replaced matters as much as what’s replaced.
Torsion Spring Replacement
A torsion spring is the coil mounted on a shaft above the door, and it does most of the lifting work on standard sectional doors. When one of these winds down or snaps, the door becomes extremely heavy and often won’t open more than a few inches. We measure wire size, inside diameter, and length so the replacement matches the door’s weight, then reset the system and test the balance before we leave. The torsion assembly is under serious tension and can cause injury if handled without the right winding bars and control, so this isn’t a job to attempt with a socket set and a ladder.
Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch as the door closes. You need replacement when a coil has stretched out of shape, lost tension, or the door slams down instead of settling. These springs carry their own hazard because a failed one can snap back toward the track or the opener. We replace them as a matched pair, add or replace the safety cables that contain a break, and check that the door’s travel stays smooth.
Broken Spring Repair
A broken spring announces itself with a loud bang and a door that won’t budge, or one that lifts crooked and drops hard. Sometimes the break is visible as a gap in the coil; other times it’s a weakened spring that no longer holds weight. We confirm the break, check the cables and rollers for strain caused by the failure, and replace the spring with one rated for your door. We don’t try to rewind or patch a snapped spring; a broken coil is replaced, not repaired.
Spring Adjustment
Adjustment is for springs that are intact but out of balance, letting the door drift or making the opener strain to lift it. A properly balanced door stays put halfway up and moves with light hand pressure. We check the winding, adjust tension to match the door’s weight, and confirm the opener isn’t working harder than it should. If you hear groaning or the door feels heavier than usual, an adjustment now can save a spring failure later.
Safety Cable Installation
Safety cables are the steel cables threaded through extension springs that catch a spring if it breaks. Without them, a snapped spring can whip across the garage. Many older doors in Kempsville were built without them, and it’s a cheap addition to have done whenever springs are replaced. We install and inspect cables as part of any extension spring job and recommend them on any door that doesn’t have them.
Spring Inspection
Not every spring problem is a break. A visual and hands-on inspection catches stretched coils, rusting, uneven tension, and worn hardware before a failure happens. Our technicians look at wire size, coil gaps, cable condition, and how the door tracks through its travel. If your door is more than a few years old and you’ve never had it checked, an inspection is a sensible call before something snaps at the wrong moment.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
The spring system is tied to the door’s weight and track layout, so knowing the brand tells us something about how it was built. We’re certified to diagnose and repair across LiftMaster and Chamberlain opener systems, which matters because a failing spring puts extra load on the opener and can damage it if the two aren’t addressed together. When we replace your spring, we also confirm the opener isn’t being forced past its limits by a door that’s gone out of balance.
Craftsman and Raynor doors and openers turn up on plenty of Kempsville homes, and we know where those systems wear. Raynor sectional doors have their own track geometry and spring setups, and Craftsman openers often need their force settings checked after a spring replacement so the logic board doesn’t trip. Whether you have Craftsman, Raynor, or any other make, we can help. We’re not a dealer pushing a product line; the recommendation follows the door you already have.
Signs You Need Garage Door Spring Repair Right Now
Springs rarely fail out of nowhere. There are usually warning signs in the days and weeks before, and catching one early keeps the repair simpler.

- A loud bang from the garage. That’s the sound of a torsion spring snapping, and it often happens while the door is down. If you hear it, don’t force the opener; the door is now dead weight and the opener can’t lift it safely.
- The door won’t open or only lifts a few inches. A door that moves partway and stops usually means the spring is broken or has lost nearly all its tension. Trying to push it up by hand puts you under a heavy door with a compromised lifting system.
- The door feels extremely heavy when you lift it manually. A balanced door should lift with one hand. If it takes real effort, the spring is tired or the tension is wrong, and the opener is doing work it wasn’t designed for.
- The door closes too fast or slams down. A door that drops instead of settling softly is a sign that spring tension has dropped or an extension spring has stretched out. That’s a control problem and a safety problem at once.
- Visible gaps, rust, or stretched coils. A gap in the coil, heavy rust on the wire, or noticeably uneven extension springs all point to a spring that’s near the end of its life. It’s the right time to replace it on your schedule rather than after a failure.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone consult and same-day scheduling. When you call, we ask what the door is doing, whether it’s up or down, and the brand if you know it. That lets us arrive with the right springs and tools on the first visit whenever possible. For an urgent failure, emergency service is available when it can’t wait.
- 2
On-site diagnosis. The technician checks the spring system, cables, rollers, and how the door tracks through its travel. We measure wire size and inside diameter on torsion springs and confirm the door’s weight so the replacement is matched, not guessed.
- 3
Written estimate before any work. You get the price up front, in writing, and the work doesn’t start until you agree to it. If we find something else that needs attention, we explain it and price it before touching it.
- 4
The spring replacement itself. We wind down the old springs using proper winding bars, remove and replace the spring or springs, and install or check the safety cables. Springs on a matched pair are replaced together so the door stays balanced.
- 5
Balance test and walk-through. We test the door by hand and with the opener, adjust the tension, and confirm the door stays put at the halfway point. Then we walk you through what was replaced and how the door should feel and sound going forward.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Kempsville?
Garage door spring repair in Kempsville typically runs $180 – $340 for a single spring, and the written estimate you receive on site sets the final price. That range covers the diagnosis, the spring replacement, and the balance test. If your door uses a matched pair, both springs are usually replaced together, so a pair costs about twice that range. A few common scenarios:
| Service | Typical estimated range |
|---|---|
| Single spring replacement (torsion or extension) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair (if cables are strained) | $130 – $250 |
| Opener repair (if the opener was damaged) | $120 – $320 |
| Roller replacement | $110 – $220 |
| General garage door repair | $150 – $600 |
What affects the price: whether it’s one spring or a pair, the spring type (torsion versus extension), door size and weight, and whether a related part like a cable or roller needs replacing at the same time. Rust or a door that’s out of balance can add to the job. To avoid overpaying, get the estimate in writing before work starts and ask what’s included, especially whether safety cables and a balance test are part of it. Our free estimate covers the diagnosis and the written price, with no obligation to book.
Garage Door Spring Repair Near Kempsville – Our Service Area
We handle spring repair throughout Kempsville and the surrounding communities, including Salem, Indian River, Thalia, Little Neck, Red Mill, and Town Center. When a door is stuck, we work to get a technician out the same day whenever possible, and emergency service is there when it can’t wait. For nearby work, see our garage door spring repair page for that area.
Serving Kempsville, VA – Our Local Coverage Area
We serve Kempsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Kempsville
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that counterbalance your door’s weight. The spring does most of the lifting, so when it fails the door becomes too heavy for the opener or for you to lift by hand. The repair involves matching a new spring to your door’s weight, swapping out the failed coil, and rebalancing the system. We handle it as a standalone service rather than a side job, because springs are the most dangerous part of the door to work on.
Most single-spring jobs take about an hour to an hour and a half on site once the technician arrives with the right spring. A matched pair takes a bit longer, and if cables or rollers need attention, add time for those. The bigger variable is getting the correct spring matched to your door, which is why we ask for the brand and symptoms when you call. In many cases we can complete the work the same day.
Garage door spring repair in Kempsville typically costs $180 – $340 for one spring, with a matched pair costing about twice that. The final price depends on the spring type, door size, and whether related parts need replacing. The written estimate you receive before work starts sets the price. Call (844) 697-8393 for an exact quote; estimates are free.
Yes, we’re certified to diagnose and repair across LiftMaster and Chamberlain systems, along with Craftsman and Raynor. The spring is separate from the opener, but a failing spring puts strain on the opener motor and can trip its force settings. When we replace your spring, we also check that your LiftMaster or Chamberlain opener is set correctly for the door’s new balance. Whether you have one of those brands or any other make, we can help.
Often yes. A broken spring is one of the most common same-day calls we handle, and emergency service is available when a failed spring leaves your car stuck or compromises the security of your home. Call (844) 697-8393 and we’ll tell you what’s available for a Kempsville address. The sooner you call, the more likely we can get out the same day.
We stand behind the work with a satisfaction guarantee, and the specific warranty terms are confirmed with your written estimate so you know what’s covered before we start. Spring lifespan depends on the cycles the door runs and the quality of the replacement, which is why we match the spring to your door rather than using a one-size part. Ask about coverage when you call and we’ll walk you through it.
First, don’t try to lift the door or run the opener while the spring is broken, since that can damage the opener or the door. Clear the area under and around the door so the technician has room to work. If you know the door or opener brand, have it ready, along with a rough idea of the door’s size and age. That helps us arrive with the right spring and finish the job in one visit.
Schedule Your Garage Door Spring Repair Service in Kempsville Today
A broken spring doesn’t fix itself, and forcing the door only causes more damage. Call Garage Door Repair Kempsville at (844) 697-8393 for same-day service when it can’t wait and a free, no-obligation estimate. We’ll diagnose the spring, give you a price in writing before any work starts, and get your door lifting smoothly again. Visit Garage Door Repair Kempsville for the full range of what we do. You can also read more about garage door spring repair for our neighboring area.
Written by the team at Garage Door Repair Kempsville.